Filter
Top Products
5 ENTERING & SETTING ITEMS
210 Default Settings for List & Report Output
To set the default setting for direct TX report
1. Select "01. TX REPORT" using the
or button and press the
[ENTER] button.
2. Select the output setting using the
or button and press the
[ENTER] button.
[1.ALWAYS]:
To always print a transmission report
whenever a document is transmitted.
[2.ON ERROR]:
To only print a transmission report
when an error has occurred.
[3.OFF]:
To not print a transmission report
automatically.
* Default for North America: [2.ON
ERROR]
Default for Europe: [1.ALWAYS]
To set the default setting for memory TX report
1. Select "02. MEMORY-TX REPORT"
using the or button and
press the [ENTER] button.
2. Select the output setting using the
or button and press the
[ENTER] button.
[1.ALWAYS]:
To always print a transmission report
whenever a document is transmitted.
[2.ON ERROR]:
To only print a transmission report
when an error has occurred.
[3.OFF]:
To not print a transmission report
automatically.
* Default for North America: [2.ON
ERROR]
Default for Europe: [1.ALWAYS]
3. To print the first page image of the
Fax document on TX report, select
"2. ON" and press the [ENTER] but-
ton.
y Select "1. OFF" if this option is not
required.
* Default: [2.ON]
COMMUNICATION REPORT
01.TX REPORT
02.MEMORY-TX REPORT
03.MULTI-ADD REPORT
TX REPORT
1.ALWAYS
2.ON ERROR
3.OFF
COMMUNICATION REPORT
01.TX REPORT
02.MEMORY-TX REPORT
03.MULTI-ADD REPORT
MEMORY-TX REPORT
1.ALWAYS
2.ON ERROR
3.OFF
PRINT 1st PG IMAGE?
1.OFF
2.ON