Filter
Top Products
Default Settings for List & Report Output 211
To set the default setting for multi-address TX report
1. Select "03. MULTI-ADD REPORT"
using the or button and
press the [ENTER] button.
2. Select the output setting using the
or button and press the
[ENTER] button.
[1.ALWAYS]:
To always print a transmission report
whenever a document is transmitted.
[2.ON ERROR]:
To only print a transmission report
when an error has occurred.
[3.OFF]:
To not print a transmission report
automatically.
* Default for North America: [2.ON
ERROR]
Default for Europe: [1.ALWAYS]
3. To print the first page image of the
Fax document on TX report, select "2.
ON" and press the [ENTER] button.
y Select "1. OFF" if this option is not
required.
* Default: [2.ON]
To set the default setting for multi-polling report
1. Select "04. MULTIPOLL REPORT"
using the or button and
press the [ENTER] button.
2. Select the output setting using the
or button and press the
[ENTER] button.
[1.ALWAYS]:
To always print a report whenever a
document is transmitted.
[2.ON ERROR]:
To only print a report when an error
has occurred.
[3.OFF]:
To not print a report automatically.
* Default for North America: [2.ON
ERROR]
Default for Europe: [3.OFF]
COMMUNICATION REPORT
01.TX REPORT
02.MEMORY-TX REPORT
03.MULTI-ADD REPORT
MULTI-ADD REPORT
1.ALWAYS
2.ON ERROR
3.OFF
PRINT 1st PG IMAGE?
1.OFF
2.ON
COMMUNICATION REPORT
02.MEMORY-TX REPORT
03.MULTI-ADD REPORT
04.MULTIPOLL REPORT
MULTIPOLL REPORT
1.ALWAYS
2.ON ERROR
3.OFF