Filter
Top Products
Default Settings for List & Report Output 213
4
Press the [FAX] button to return to the Fax basic screen.
y You can press the [USER FUNCTIONS] button instead of [FAX] to exit the user func-
tions menu and return to the default mode basic screen.
P.24 “Message LCD Screen”
3. To print the first page image of the Fax
document on report, select "2. ON"
and press the [ENTER] button.
y Select "1. OFF" if this option is not
required.
* Default: [2.ON]
To set the default setting for relay TX end terminal report
When this equipment is setup as a relay station, the report of the transmission to the relay
destinations is transferred to the destination registered.
1. Select "07. RELAY END REPORT"
using the or button and
press the [ENTER] button.
2. Select the output setting using the
or button and press the
[ENTER] button.
[1.ALWAYS]:
To always send a report to the origina-
tor.
[2.ON ERROR]:
To send a report when an error has
occurred.
[3.OFF]:
To not send a report automatically.
* Default for North America: [2.ON
ERROR]
Default for Europe: [1.ALWAYS]
3. To print the first page image of the Fax
document on report, select "2. ON"
and press the [ENTER] button.
y Select "1. OFF" if this option is not
required.
* Default: [2.ON]
PRINT 1st PG IMAGE?
1.OFF
2.ON
COMMUNICATION REPORT
05.
RELAY ORIGINATOR REPORT
06.RELAY STATION REPORT
07.RELAY END REPORT
RELAY END REPORT
1.ALWAYS
2.ON ERROR
3.OFF
PRINT 1st PG IMAGE?
1.OFF
2.ON