Filter
Top Products
4 SYSTEM FUNCTIONS
152 Polling Communications
7
Select a day-of-week to end
polling RX using the or
button and press the
[ENTER] button.
y Since the end time is automati-
cally specified by entering the
start time and the duration, you
specify only the day-of-week in
this step.
8
Select “4. DURATION”
using the or button
and press the [ENTER] but-
ton.
9
Select the duration to spec-
ify polling RX using the
or button and press the
[ENTER] button.
y Highlight time and minutes val-
ues using the or button.
y For minutes value, you can set it
at the unit of 5 minutes
y End time is automatically speci-
fied by entering the start time
and the duration.
10
Select “5. INTERVAL” using
the or button and
press the [ENTER] button.
11
Select the call interval for
polling RX using the or
button and press the
[ENTER] button.
y You can set the call interval
between 10 to 70 minutes at the
unit of 5 minutes.
y If the time period between the
start time and the end time is
shorter than the call interval,
polling is performed only once at
the start time.
END DATE
PROG. CONT. POLL.
WED
2.START :MON 08:00AM
PROG. CONT. POLL.
3.END :WED 05:00PM
4.DURATION :7HR 20MIN
PROG. CONT. POLL.
2.START :MON 08:00AM
3.END :FRI 05:00PM
4.DURATION :7HR 20MIN
DURATION
PROG. CONT. POLL.
07:30
2.START :MON 08:00AM
PROG. CONT. POLL.
3.END :FRI 05:00PM
4.DURATION :7HR 30MIN
PROG. CONT. POLL.
3.END :FRI 05:00PM
4.DURATION :7HR 20MIN
5.INTERVAL :10MIN
INTERVAL
BETWEEN CALL
PROG. CONT. POLL.
30
3.END :FRI 05:00PM
PROG. CONT. POLL.
70MIN
10MIN
4.DURATION :7HR 20MIN
5.INTERVAL :30MIN