Filter
Top Products
3 ADVANCED FUNCTIONS
82 Function Keys
Function Keys
Frequently used functions are assigned to the keys located on the left side of the control panel.
These keys allow direct access to frequently used function settings and operations.
Description of 22 function keys
Function Keys: Open the flip panel and press
the desired key.
These keys are only effective in the Fax mode.
Press the [FAX] button on the control panel to
activate the Fax mode.
CHAIN DIAL
COMM
Used to dial a remote party using Chain Dialing. ( P.84 “Chain Dial
Communication”)
CHARGE CODE Used to input the charge code. ( P.101 “PIN mask”)
DELAYED COMM Schedules a delayed communication job to be performed at the desig-
nated date & time. ( P.85 “Delayed transmission (Time designation)”)
DIRECT TX Used to send the original as it is being scanned. ( P.87 “Direct trans-
mission”)
LOW SPEED TX Used to select a lower transmission speed to send a document when
poor line conditions are expected, such as when sending the document
to overseas location that can only accept low speed data. ( P.88 “Low
speed transmission”)
ITU MAILBOX Used for Mailbox Communications or Relay, Transmission with remote
Faxes that support the ITU-T F-code functions. ( P.111 “Mailbox Com-
munication”)
COVER SHEET Used to attach a cover sheet to a document to be transmitted. ( P.89
“Cover sheet registration”)
PRIORITY TX Used to send the original set on the document glass or in the document
feeder prior to all previously scheduled transmissions. ( P.92 “Priority
transmission”)
MULTI Used to send the same document to 2 or more remote Faxes in a single
operation. ( P.106 “Multi-address Transmission (Broadcasting)”)