Filter
Top Products
Setting the Transmission Conditions 39
Setting the Scanning Conditions for Each Page
When you want to send multi-page originals by placing them on the original glass, you can
change the following scanning conditions for each page:
y Resolution
y Original mode
y Exposure
This function is convenient for newspapers and books can be placed on the original glass and
sent.
1
Press the [FAX] button on the control panel.
2
Place the original on the glass. ( P.32 “When setting originals on
the glass”)
3
Set the transmission conditions. ( P.36 “Setting the Transmission
Conditions”)
4
Specify the remote Fax.
y Keypad Dialing (Direct Entry with
Digital Keys): P.41
y One Touch Key Dialing: P.43
y Abbreviated Dialing: P. 46
y Alphabet Dialing: P.48
y Group Dialing: P.50
y The first original is scanned.
y The screen on the right may
appear when the equipment has
failed to detect the original size.
In this case, re-place the origi-
nal, or select the original size
using the or button
and press the [ENTER] button.
y When placing A5 size original,
select "1. A4".
y When placing A5-R or B5-R size
original, select "5. A4-R".
5
Select “2. CHANGE CUR-
RENT SETTINGS” using the
or button and
press the [ENTER] button.
6
Select “2. RESOLUTION”
using the or button
and press the [ENTER] but-
ton.
SCANNING TO MEMORY
JOB NUMBER :008
:001
:099%
SCANNING PAGE
RESIDUAL MEMORY
Select original size
2.LD
3.LT-R
1.LT
SCANNING TO MEMORY
JOB NUMBER :008
:001
:099%
SCANNING PAGE
RESIDUAL MEMORY
BUILD FAX JOB
2.CHANGE CURRENT SETTINGS
3.COMPLETE
1.SCAN NEXT ORIGINAL
SETTING
2.RESOLUTION :STANDARD
1.COMPLETE