Filter
Top Products
Function Keys 87
Direct transmission
The remote Fax is dialed immediately, and the original will be sent as it is being scanned. This
mode is useful if you want to confirm connection to the remote Fax or when you want to send an
urgent Fax document. Originals are not stored in memory, and you can only specify one remote
Fax at a time.
y You can use the following dialing methods:
Keypad Dialing (Direct Entry with Digital Keys): P.41 “Keypad Dialing (Direct Entry with
Digital Keys)”
One Touch Key Dialing: P.43 “One Touch Key Dialing”
Abbreviated Dialing: P.46 “Abbreviated Dialing”
Alphabet Dialing: P.48 “Alphabet Dialing”
y This function is valid for the current job (one transmission) only.
Redialing operation is not effective for direct transmission.
1
Press the [FAX] button on
the control panel.
2
Press the key.
y "DIRECT TRANSMIT" screen
appears.
3
Select “1. YES” using the
or button and press
the [ENTER] button.
y To cancel this function, select "2.
NO" and press the [ENTER] but-
ton to return to the basic screen.
4
Place the original(s) and
perform the transmission
operation.
y If you want to cancel the trans-
mission after performing the
transmission operation, press
the [CLEAR/STOP] button to dis-
play the screen on the right.
y If you leave the equipment for
about 45 seconds, it automati-
cally returns to the basic screen.
DIRECT TRANSMIT
1.YES
2.NO
DIRECT TRANSMIT
1.YES
2.NO
CANCEL THIS JOB?
1.YES
2.NO
12345