Filter
Top Products
2 BASIC FUNCTIONS
42 Specifying the Remote Fax
4
Press the [START] button
on the control panel.
When setting originals on the
glass
y When you want to send multi-
page originals with the current
scanning conditions unchanged,
place the next original on the
glass, and select “1. SCAN
NEXT ORIGINAL” on “BUILD
FAX JOB” screen, then press the
[ENTER] button. After finished
scanning of the last page, select
“3. COMPLETE” on “BUILD FAX
JOB” screen and press the
[ENTER] button to send the orig-
inals.
y When you want to change the
scanning conditions for each
page, select “2. CHANGE CUR-
RENT SETTINGS” on “BUILD
FAX JOB” screen and press the
[ENTER] button.
For details of this operation, see
the following page.
P.39 “Setting the Scanning
Conditions for Each Page”
y When you want to send single-
page original, select “3. COM-
PLETE” on “BUILD FAX JOB”
screen and press the [ENTER]
button to send the original.
When using the (Reversing)
Automatic Document Feeder
(optional)
The remote Fax is dialed
immediately and communication is
initiated.
y The screen on the right may
appear when the equipment has
failed to detect the original size.
In this case, re-place the origi-
nal, or select the original size
using the or button
and press the [ENTER] button.
SCANNING TO MEMORY
JOB NUMBER :009
:001
:099%
SCANNING PAGE
RESIDUAL MEMORY
ENTER TEL NUMBER(MAX128):
2006-04-10 11:06 M: 100%
COMM.OPTION
RESOLUTION
:STANDARD
Select original size
2.LD
3.LT-R
1.LT