Filter
Top Products
1 BEFORE USING FAX
22 Description of Each Component
Function keys
1. CHAIN DIAL COMM ( P.84 “Chain Dial Communication”)
Used to dial a remote party using Chain Dialing.
2. CHARGE CODE ( P.101 “PIN mask”)
Allows entry of a charge code at the time of dialing or during Abbreviated Dial and One
Touch Dial programming.
3. DELAYED COMM ( P.85 “Delayed transmission (Time designation)”)
Schedules a delayed communication job to be performed at a designated date and time.
4. DIRECT TX ( P.87 “Direct transmission”)
Allows transmission direct from the document glass or the document feeder without the use
of memory.
5. LOW SPEED TX ( P.88 “Low speed transmission”)
Used to select a lower transmission speed to transmit a document when poor line conditions
are expected, such as when transmitting to an overseas location that can only accept low
speed data.
6. ITU MAILBOX ( P.112 “Mailbox communication condition”)
Used for Mailbox Communications or Relay, Transmission with remote Faxes that support
the ITU-T F-code functions.
7. COVER SHEET ( P.89 “Cover sheet registration”)
Used to attach a cover sheet to a document to be transmitted.
8. PRIORITY TX ( P.92 “Priority transmission”)
Sends pages set on the document glass or in the document feeder ahead of all previously
scheduled transmissions.
9. MULTI ( P.106 “Multi-address Transmission (Broadcasting)”)
Used to create a manual grouping for multi-address transmission.
10. RECOVERY TX ( P.93 “Recovery transmission”)
Recovers from memory and sends incomplete transmissions.
11. SEND AFTER SCAN ( P.100 “Send after scan”)
Used to select whether the dialing starts while the equipment is scanning the documents or
after the equipment has scanned all documents to memory.