Filter
Top Products
Polling Communications 145
y Document data is stored in memory. Therefore, after the data is stored in memory, the
residual memory does not become 100% even when no job exists in memory.
y To delete the document data, press the key. ( P.73 “Canceling Reserved
Memory Transmissions”)
Individual polling reception
This function retrieves a document from a remote Fax. If the remote Fax is a TOSHIBA facsimile
and a 4-digit security code is programmed to the document to be polled, you must enter the cor-
rect 4-digit security code in order to retrieve the document.
When the polling document has been
already registered:
Since the screen on the right appears,
select the desired operation using the
or button and press the
[ENTER] button.
[1.DELETE]:
To replace an existing document with new
one. → go to step 7.
[2.ADD]:
To add a new document to an existing
one. → go to step 7.
[3.RETAIN]:
To retain an existing document.
→ go to step 5.
6
Scanning the polling docu-
ment starts.
y The screen on the right may
appear when the equipment has
failed to detect the original size.
In this case, re-place the origi-
nal, or select the original size
using the or button
and press the [ENTER] button.
PUBLIC FAX MAILBOX
1.DELETE
2.ADD
3.RETAIN
SCANNING TO MEMORY
SCANNING PAGE :002
RESIDUAL MEMORY :099%
JOB NUMBER :024
ENTER TEL NUMBER(MAX128):
JAN11-2005 10:26PM M: 099%
RESOLUTION : STANDARD
COMM.OPTION
Select original size
1.LT
2.LD
3.LT-R
4.LG
5.ST-R