Filter
Top Products
2 BASIC FUNCTIONS
36 Setting the Transmission Conditions
Setting the Transmission Conditions
Setting the Transmission Conditions
Resolution
Set the resolution before you scan the original to be sent. The default setting is "STANDARD".
To change the default setting from "STANDARD" to "FINE" or "ULTRA FINE", see the following
page: P.178 “Document mode”
y Reference
1
Press the [FAX] button on the control panel.
If the remote Fax cannot receive originals with the same resolution, the resolution of the
sent original is automatically converted and sent. The finer the resolution is, the longer it
takes to send an original.
Resolution Original
STANDARD Original with regular size text
FINE Original with small size text and fine illustrations
ULTRA FINE Original with ultra-fine illustrations
2
Press the [RESOLUTION]
button.
3
Select the desired resolu-
tion using the or
button and press the
[ENTER] button.
y To cancel the setting, press the
[CANCEL] button before you
press the [ENTER] button.
ENTER TEL NUMBER(MAX128):
RESOLUTION:
FINE
ULTRA FINE
STANDARD