Filter
Top Products
Default Settings for Fax Functions 191
5
Press the [FAX] button to return to the Fax basic screen.
y You can press the [USER FUNCTIONS] button instead of [FAX] to exit the user func-
tions menu and return to the default mode basic screen.
P.24 “Message LCD Screen”
Since the transmitting station information is printed on the TTI, it is required to register its
information beforehand. ( P.205 “Registering the Terminal ID”)
Send after scan
This feature allows you to determine whether dialing starts while the equipment is scanning the
documents or after the equipment has scanned all documents in the Memory TX mode.
4
Select the desired function
using the or button
and press the [ENTER] but-
ton.
[1.OFF]:
To not print the TTI.
[2.ON]:
Prints the TTI.
* Default: [2.ON]
1
Press the [USER FUNC-
TIONS] button and select
“01. DEFAULT SETTINGS”
then press the [ENTER]
button.
y "DEFAULT SETTINGS" screen
appears.
2
Select “03. FAX SETUP”
using the or button
and press the [ENTER] but-
ton.
3
Select “13. SEND AFTER
SCAN” using the or
button and press the
[ENTER] button.
TTI
1.OFF
2.ON
DEFAULT SETTINGS
01.GENERAL SETTING
02.COPY SETUP
03.FAX SETUP
DEFAULT SETTINGS
01.GENERAL SETTING
02.COPY SETUP
03.FAX SETUP
FAX SETUP
11.RECOVERY TRANSMIT
12.TTI
13.SEND AFTER SCAN