Filter
Top Products
2 BASIC FUNCTIONS
32 About Originals
Setting Originals
When setting originals on the glass
Originals are sent in the order they are placed on the original glass in both memory TX and
direct TX modes. In direct TX mode, only one page can be sent at a time.
Do not place heavy objects (8.8 lb./4 kg or more) on the original glass and do not press on it with
force.
Breaking the glass could cause personal injury.
1
Raise the Platen Cover
(optional), Automatic Docu-
ment Feeder (optional), or
Reversing Automatic Docu-
ment Feeder (optional), and
place the original A with its
face down on the glass.
2
Align the original against
the left inner corner of the
glass.
y Different size originals can also
be sent in one transmission.
y When LD, LG, LT-R, ST, COMP,
A3, A4-R, A5, B4, B5 or FOLIO
originals are placed as shown in
the figure on the right, the pre-
entered sender information is
printed in the area shown B in
the figure and sent to the remote
Fax.
y To enter the sender information,
see P.205 “Registering the
Terminal ID”.
y When LT, ST-R, A4, A5-R or B5-
R originals are placed as shown
in the figure on the right, the pre-
entered sender information is
printed in the area shown C in
the figure and sent to the remote
Fax.
A
B
C