Filter
Top Products
3 Tests and Diagnostics 3.9 Hard Disk Test
3.9 Hard Disk Test
To execute the Hard Disk Test, select 8-HARD DISK TEST from the DIAGNOSTIC TEST
MENU, press Enter, and follow the directions on the screen. The hard disk test contains
eight subtests that test the hard disk drive functions.
COUTION: The contents of the hard disk will be erased when subtest 02, 03, 04, 06, 09
or 10 is executed. Before running the test, the customer should transfer the
contents of the hard disk to another one by executing BACKUP.EXE or
others.
The following messages will appear after selecting the hard disk test from the DIAGNOSTIC
TEST MENU.
1. Select the hard disk test drive number to be tested.
Test drive number select (1:HDD#1,2:HDD#2,0:HDD1&2)
2. This message is used to select the retry operation when the hard disk controller
detects an error. Select yes or no.
HDC F/W error retry (1:yes,2:no)
3. This message is used to select the error dump operation when a data compare error is
detected. Select yes or no.
Data compare error dump (1:No,2:Yes)
3-22 PORTEGE R100 Maintenance Manual (960-440)