Filter
Top Products
4.16 LCD mask/FL inverter/LCD 4 Replacement Procedures
4.16.2 FL inverter
Removing the FL inverter
The following describes the procedure for removing the FL inverter. (See Figure 4-31.)
1. Remove the following screw fixing the FL inverter.
• M2×4Z FLAT HEAD screw x1
2. Disconnect the cable from the both sides of the connector and remove the FL
inverter.
Figure 4-31 Removing the FL inverter
Installing the FL inverter
The following describes the procedure for installing the FL inverter. (See Figure 4-31.)
1. Connect the cable to both sides of the connector and install the FL inverter.
2. Install the following screw to fix the FL inverter.
• M2×4Z FLAT HEAD screw x1
PORTEGE R100 Maintenance Manual (960-440) 4-41