Filter
Top Products
4.18 Hinge 4 Replacement Procedures
2. Remove the following screws, right side hinge and latch metal fitting.
• M2.5×5Z S-THIN HEAD screw x1
• M2.5x3SC U-THIN HEAD screw x2
Figure 4-39 Removing the palmrest cover right side hinge
Installing the palmrest cover hinge
The following describes the procedure for installing the palmrest cover hinge. (See
Figures 4-38, 4-39.)
1. Install the left side hinge and secure it with the following screws.
• M2.5×5Z S-THIN HEAD screw x1
• M2.5x3SC U-THIN HEAD screw x2
2. Install the right side hinge and latch metal fittings and secure them with the
following screws.
• M2.5×5Z S-THIN HEAD screw x1
• M2.5x3SC U-THIN HEAD screw x2
PORTEGE R100 Maintenance Manual (960-440) 4-49