Filter
Top Products
4.19 Fluorescent Lamp 4 Replacement Procedures
PORTEGE R100 Maintenance Manual (960-440) 4-59
5. Screwing the PCB and the bezel.
1) Use two screws to secure the left and right edge in the order of (1).
Caution: 1) The screw tightening torque is 0.167N·m(1.7kgf·cm) for all screws.
2) Use a Philips screwdriver with type 0 bit.
6. Installing the tapes and insulation sheets.
1) Apply the double- adhesive tape of the insulation sheet.
Caution: 1) Refer to the figure below.
2) When sticking the insulation sheet, be careful not to damage the PCB, cell
and B/L.
Figure 4-48 Replacing Toshiba fluorescent lamp(10)