Filter
Top Products
3 Tests and Diagnostics 3.20 Log Utilities
3.20.2 Operations
Selecting 5-LOG UTILITIES and pressing Enter in the DIAGNOSTIC MENU logs error
information into RAM or onto a floppy disk. The error information is displayed in the
following format:
0003 ERRORS
CNT TS-No PASS STS ADDR WD RD HSTS [ERROR STATUS NAME]
001 FDD 01 0000 110 24015 00 00 FDD-CRC ERROR
002 FDD 01 0001 110 30108 00 00 FDD-CRC ERROR
003 FDD 03 0003 110 23106 00 00 FDD-CRC ERROR
Pass count
Error status
Subtest number
Test name
FDD/HDD or
memory address
HDC status
Read data
Error status name
Write data
Error count
[[1:Next,2:Prev,3:Exit,4:Clear,5:Print,6:FD Log Read,7:FD Log Write]]
2. The error information displayed on the screen can be manipulated by the following
number keys:
The 1 key scrolls the display to the next page.
The 2 key scrolls the display to the previous page.
The 3 key returns to the Diagnostic Menu.
The 4 key erases all error log information in RAM.
The 5 key outputs the error log information to a printer.
The 6 key reads the log information from a floppy disk.
The 7 key writes the log information to a floppy disk.
3. In the case of “error retry OK,” a capital “R” will be placed at the beginning of the
error status. However, it is not added to the error count.
3-48 PORTEGE R100 Maintenance Manual (960-440)