Filter
Top Products
4 Replacement Procedures 4.3 PC card/SD memory card
4.3 PC card/SD memory card
4.3.1 PC card
Removing the PC card
The following describes the procedure for removing the PC card. (See Figure 4-2)
Caution: Insert or remove the PC card in accordance with any instructions in the PC
card manual or the manuals of the computer system you are using.
1. Push the eject button. It will pop out when you release it. Then press the eject
button again to eject the PC card.
2. Grasp the PC card and remove it.
Figure 4-2 Removing the PC card
Installing the PC card
The following describes the procedure for installing the PC card. (See Figure 4-2)
1. Make sure the eject button does not stick out.
2. Insert the PC card and press it until it is securely connected.
4-10 PORTEGE R100 Maintenance Manual (960-440)