Filter
Top Products
4.4 Memory module 4 Replacement Procedures
4. Push both the latches to the outside and remove the memory module.
Figure 4-5 Removing the memory module
Installing the memory module
To install the memory module, confirm that the computer is in boot mode. Then perform
the following procedure (See Figures 4-4, 4-5)
1. Connect the memory module to the connector on the system board and push it
downward.
Caution: The power must be turned off when you insert the memory module. Inserting
a memory module with the power on risks damaging the module or the
computer itself.
Never press hard or bend the memory module.
2. Install the memory slot cover.
3. Secure the following screws to fix the memory slot cover.
• M2×2.5B SPECIAL HEAD screw x1
PORTEGE R100 Maintenance Manual (960-440) 4-13