Filter
Top Products
4.8 MDC board/HDD cable 4 Replacement Procedures
4.8 MDC board/HDD cable
4.8.1 MDC board
Removing the MDC board
The following describes the procedure for removing the MDC board. (See Figure 4-14.)
1. Peel off the glass tape. (See Figure 4-12.)
2. Remove the following screws securing the MDC board.
• M2×4Z FLAT BIND screw x2
3. Disconnect the MDC cable from the MDC board.
Figure 4-14 Removing the MDC board
Installing the MDC board
The following describes the procedure for installing the MDC board. (See Figure 4-14)
1. Connect the MDC cable to the MDC board.
2. Install the MDC board and secure it with the following screws.
• M2×4Z FLAT BIND screw x2
3. Apply the glass tape to secure the MDC cable.
PORTEGE R100 Maintenance Manual (960-440) 4-23