Filter
Top Products
4.9 Speaker/ RTC battery 4 Replacement Procedures
4.9 Speaker/ RTC battery
4.9.1 Speaker
Removing the speaker
The following describes the procedure for removing the speaker (See Figures 4-16, 4-17).
1. Peel off the glass tape.
Figure 4-16 Peeling off the glass tape
2. Remove the speaker cable from connector PJ6002 on the system board and
remove the speaker rubber holder from the speaker slot.
3. Remove the speaker from the rubber holder.
Figure 4-17 Removing the speaker
PORTEGE R100 Maintenance Manual (960-440) 4-25