Filter
Top Products
3.24 SETUP 3 Tests and Diagnostics
Always Low Disables Intel SpeedStep technology and always runs the
processor at low power consumption and low speed
(e) Auto Power On
This option displays setting for Wake-up on LAN.
Disabled Indicates auto power on and Wake-up on LAN is not set.
Enabled Indicates auto power on and Wake-up on LAN is set.
When “Enabled” is set, the following sub-window appears.
Auto power on and Wake-up on LAN is set in the options sub-window. To set
alarm time, use Space and BackSpace. To switch between time and
minute, month and date, use ↑ and ↓.
Alarm Time = 00:00:00
Alarm Date Option = Disabled
Wake-up on LAN = Disabled
OPTIONS
Alarm Time sets a time and date for automatic power on. Second cannot be
set. When this option is set to “Disabled”, the time for automatic power on is
not set.
Alarm Date Option sets a month and date in order for automatic power on.
When Alarm Time is set to “Disabled”, month and date for automatic power
on is not set.
Wake-up on LAN automatically turn on the computer when accessed by the
administrator of LAN. When Built-in LAN is “Enabled”, this option can be
set to “Enabled”. AC adapter is required for this option.
NOTE: 1. Do not remove the AC adapter and battery pack at the same time when you
use this feature. If you do so, data saved by the resume function will be lost.
You must also reset this option.
2. If you have set a password and the computer boots by the Auto Power On
function and Resume is on, the computer will start with the instant security
function enabled. The password = message is not displayed; however, you
must enter the password to use the computer.
3. This option is enabled only once, the setting is reset, after booting up
PORTEGE R100 Maintenance Manual (960-440) 3-69