Filter
Top Products
4 Replacement Procedures 4.10 Wireless LAN board
Installing the wireless LAN board
The following describes the procedure for installing the wireless LAN board (See Figures
4-19, 4-20, 4-21).
1. Install the wireless LAN board to the cable on the wireless board.
2. Connect the two wireless LAN cables to the wireless LAN board and apply the
glass tape to secure them.
3. Connect the wireless board to PJ100 on the system board.
4. Turn over the computer and fix the wireless board with the following screws.
• M2×4Z FLAT BIND screw x2 or x1
• TORX screw 0 or x1
4-30 PORTEGE R100 Maintenance Manual (960-440)