Filter
Top Products
3 Tests and Diagnostics 3.22 Floppy Disk Drive Utilities
4. DUMP program
(a) When DUMP program is loaded, the following message appears:
DIAGNOSTICS-HARD DISK & FLOPPY DISK DUMP : VX.XX
Drive type select (1:FDD, 2:HDD) ?
(b) Select a format type number. If 2:HDD is selected, the display will go to step
(g).
If 1:FDD is selected, the following message appears:
Select drive number (1:A, 2:B) ?
(c) Select a drive number and the following message will be displayed.
Format type select (1:2DD, 2:2HD) ?
(d) Select a format type and the following message will appear:
Insert source disk into drive A:
Press any key when ready.
(e) Select a media mode and the following message will appear:
Insert source disk into drive A:
Press any key when ready.
(f) Insert a source disk and press any key and the following message will appear:
—— Max. address ——
[Track ] = XXXX
[ Head ] = XX
[Sector] = XX
Track number ??
(g) Set the track number, the head number and the sector number you want to
dump. The system will access the disk and dump a list. Then the message
shown in (j) will appear.
(h) The following message will appear.
Select drive number (1:C, 2:D) ?
(i) Select a drive number and the following message will be displayed.
—— Max. address ——
[LBA ] = XXXXXXXXX
LBA number ??
3-54 PORTEGE R100 Maintenance Manual (960-440)