Filter
Top Products
___________________________________________ PC Setup 4-27
Setzone.ps allows you to set your printer’s EtherTalk zone namer.
Open the file in a text editor and change “name of zone” in the
parentheses to the name of your EtherTalk zone. Save the file, and
download it to your printer. The printer must be restarted before the
change is effective.
Startpg.off disables the printer’s start-up page feature, which
prevents it from printing automatically each time the printer is
restarted. See “Start-up Page” in chapter 6 for details.
Startpg.on enables the start-up page feature, which causes it to print
automatically each time the printer is restarted. See “Start-up Page”
in chapter 6 for details.
Sysparm.ps prints a list of current system parameters.
XANTÉ Command Center
XANTÉ Command Center allows you to check and control many
printer functions from your PC. See “XANTÉ Utilities Installer” earlier
in this chapter for installation details.
The File and Help menus are similar to other Windows applications
and are not described in this section.
Note: Your PC must be connected directly to the printer through a
parallel or serial cable; XANTÉ Command Center cannot be
run on a network.
Options Menu
This menu allows you to change the screen colors for XANTÉ
Command Center.