Filter
Top Products
___________________________________________ PC Setup 4-29
– The General screen gives the product name, the PostScript
version, the amount of RAM installed, the margin (Page
Align) settings, and the size and status of storage devices
configured on the printer.
– The Diagnostic screen provides an EEPROM status update.
– Your Product Information screen lists the product name.
• I/O Timeout allows you to select the number of seconds the
printer waits for additional incoming data before cancelling a job
and returning to the idle state, ready to accept another job.
• Print Info allows you to print a copy of the same information
available through Get Info.
• Receive Queue gives you access to a buffer that stores
PostScript processing information. Check this file for
information if you receive a PostScript error while printing.
• Reset Controller allows you to reboot and reinitialize the printer
from your computer.
• Send Ctrl-D sends a Control-D (PostScript’s end-of-job marker)
to the printer.
• Send PostScript File allows you to download PostScript files to
your printer.
• Set Printer Name allows you to rename your printer on a
network other than Novell. Your printer’s default name is the
product name, which can be confusing on networks where there
may be more than one printer of the same model.
• Status provides a fast, easy method to check current printer
status. For example, it can indicate if your printer is idle (ready
to receive and process new data) or busy.
• TCP/IP Address allows you to set the address or enable the
LPR interface on the optional Ethernet port.