Filter
Top Products
_____________________________________ Troubleshooting 11-3
Introduction
This chapter describes the status messages that can direct you to the
source of a problem, suggests solutions for some typical printer
setup and print quality problems, and provides information about
preventing and clearing paper jams.
Status Messages
Printer front panel window messages provide printer status information
and can help you determine the source of a problem or paper jam.
Accel-a-Writer 3
X
Appears when the printer is first turned
on, before the initialization process
begins. The X will be replaced by the
letter of the printer model.
DUPLEX COVER OPEN The duplexer cover is not closed
properly.
DUPLEX PAPER JAM A paper jam has occurred in or before
the duplexer.
EARLY PAPER JAM A media jam has occurred along the
paper path caused by media reaching a
position earlier than expected.
E:FIFO The FIFO SIMM or SODIMM is not
present, is not properly inserted, or is
broken.
E:FIXING ROLLER There is a hardware problem with the
fuser.
E:FUSER There is an error with the fuser, such as
a temperature inaccuracy.
E:LASER There is a hardware problem with the
laser.