Filter
Top Products
3-14 Macintosh Setupbb ____________________________________
Mac Watermark Plug-in Folder
Each language directory in the PSPrinter 8.3 folder has a Mac
Watermark Plug-in folder. This folder contains the Adobe PSPrinter 8.3
Watermark plug-in for the Macintosh and a user guide. These files
allow you to customize your output with underlying watermarks.
The plug-in requires the following system setup:
• PSPrinter 8.3.1 (does not work with AdobePS 8.5.1)
• Macintosh running System 7.1 or later
• 100 K of available disk space for the plug-in, preferences, and
Watermarks folder
The user guide (less than 10 page SimpleText file) describes system
requirements and plug-in installation. To print this guide, double-click
WM UserGuide; then, select File: Print.
Configuring the PPD
1. Select Chooser from the Apple menu. The Chooser window
appears (fig. 3.4).
2. Select AdobePS or PSPrinter from the box on the left (top left
in a network environment); a list of available printers appears
to the right.
Note: If the printer does not appear in the list, verify that
—the printer is on and cable connections are secure
—LocalTalk or EtherTalk (depending on your setup)
is enabled on the printer front panel
—the correct protocol (AppleTalk or EtherTalk) is
selected on the front panel
—your Macintosh is setup for LocalTalk or EtherTalk
in the AppleTalk Control panel.