Filter
Top Products
3-44 Macintosh Setupbb ____________________________________
b. Under Manual Feed Options, if you are using standard
size media, click Standard Paper Size and select the size
from the drop-down menu. If you are using a custom
size, click Custom Paper Size and enter the size and
select the unit of measure (inch, millimeter, or
centimeter).
c. Under Print Settings, select the resolution from the
drop-down menu. Click the Negative Film box if you are
printing negative output.
d. Click OK. The More X-ACT window reappears.
5. Click Print Calibration Page.
D
D
Measure dashed line from top edge of
paper to right arrow tip; enter results in
millimeters in box D.
C
Measure solid horizontal line from left arrow
tip to right arrow tip; enter results in
millimeters in box C. This should be
close to the value shown in box H.
B
Measure dashed line from top edge of
paper to left arrow tip; enter results in
millimeters in box B.
A
B
C
F
A
Measure dashed line from left edge of
paper to top arrow tip; enter results in
millimeters in box A.
E
E
Measure solid vertical line from top arrow
tip to bottom arrow tip; enter results in
millimeters in box E. This should be
close to the value shown in box G.
F
Measure dashed line from left edge of
paper to bottom arrow tip; enter results in
millimeters in box F.
G
H
254.0
190.5
I
Measure dashed line from bottom edge of
paper to left arrow tip; enter results in
millimeters in box
I
.
J
Measure dashed line frombottom
edge of paper to bottom arrow tip;
enter results in millimeters in box J.
I
J
Fig. 22 X-ACT Calibration Page