Filter
Top Products
10-8 Optionsbb __________________________________________
Removing the Paper Cassette Feeder
1. Make sure the printer displays a PLEASE WAIT or
READY/IDLE message. Then, turn off the printer and disconnect
the power cord from the power supply (fig. 2.6).
2. Remove media from the multipurpose feeder and the output
tray; then, close the multipurpose feeder.
3. Remove all paper cassettes from the printer. Pull each cassette
out until it stops. Lift up slightly and remove it from the printer
(figs. 2.16 and 2.17).
4. Remove the screws that secure the feeder to the printer (fig.
10.3).
Warning! The printer weighs approximately 58.5 lbs (26.5 kg)
without toner, cassettes, and media installed. Always
have two people lift the printer using the recessed grip
areas on the right and left sides.
5. Lift the printer off the feeder vertically until the printer is free
of the feeder’s stubs (fig. 10.2). Set the printer on a stable
surface that will support its weight.
6. Repack the feeder in its original box and store it in a location
that meets the guidelines in “Printer Location” in chapter 2.
7. Set the printer up again following the instructions in chapter 2.
2,000 Sheet Feeder
This section describes installing, loading, and removing the optional
2,000 sheet paper feeder. This feeder can be installed as one of the
two additional paper feeders on your printer. The 2,000 sheet feeder
supports letter and A4 size paper.