Filter
Top Products
_______________________________________ Configuration 6-19
• None, the factory default, prints at normal speed and with no
data compression.
• Optimized for Quality compresses image data for faster printing than
normal but with some (usually not noticeable) loss of image quality.
• Optimized for Speed implements a greater degree of data
compression to provide the fastest print time but with the
possibility of a noticeable loss of data quality.
Note: Optimize selections do not function if the print job contains
an image that is masked or rotated to anything other than 0°,
90°, 180°, or 270°.
Font Accelerator
Font Accelerator allows you to set aside a portion of RAM disk to
store fonts for quick system access. Font Accelerator automatically
loads the most recently used fonts from the printer’s optional hard
disk into the RAM disk. This eliminates time usually required to
access fonts from the hard disk. The Font Accelerator menu is active
only if fonts are downloaded to an optional hard disk on the printer
and RAM disk is enabled for 1 MB or more.
Set Font Accelerator from the MISC:FONT ACCEL configuration
menu. Options indicate the percentage of RAM disk that the Font
Accelerator can use. The factory default is 100%.
Halftone Calibration Technology (Gamma)
XANTÉ’s Halftone Calibration Technology (3G) allows you to adjust
printer output for ink, media, file, and environmental conditions. For
example, if a scanned image is too dark, you can select a new gamma
setting to lighten and enhance the details. Gamma corrections bring out
details that can be lost when printing at higher line screens or when dark
photos are scanned.