Filter
Top Products
_____________________________________ Macintosh Setup 3-5
The XANTÉ Utilities folder contains XANTÉ Command Center,
Adobe Downloader, a Downloader readme file, and the XD-1
(densitometer) software. See “XInstaller,” “XANTÉ Command Center,”
“Adobe Downloader,” and “Calibration with a Densitometer (Gamma)”
later in this chapter to load and ;use these files.
XInstaller is an installation program for XANTÉ Command Center,
Adobe Downloader, your printer’s PostScript PPDs, and the appropriate
PDF (Printer Description File) for QuarkXPress (if it is installed on your
system), and the XD-1 software. See “XInstaller” later in this chapter.
Always check the CD-ROM Readme files before printing.
Adobe Acrobat Reader 3.0
XANTÉ Utilities CD-ROM documentation is in Adobe Acrobat
Portable Document Format (PDF). To install Adobe Acrobat Reader
3.0
1. Insert the XANTÉ Utilities CD-ROM into your Macintosh.
2. Double-click the XANTÉ Utilities 4.0 icon; then, double-click
the Acrobat icon.
3. Check the ReadMe-Reader file; then, double-click the Reader
3.0 Installer icon to install Acrobat Reader 3.0.
XInstaller
Use XInstaller to load XANTÉ Utilities, your printer’s PPD, and
your printer’s QuarkXPress PDF (if QuarkXPress is installed on your
system), and to launch the AdobePS 8.6 driver installer.
1. Insert the XANTÉ Utilities CD-ROM. Double-click the XANTÉ
Utilities CD icon; then, double-click the XInstaller icon.
2. Click Continue.