Filter
Top Products
Description of Menu Items
Phaser® 6128MFP Multifunction Printer
116
Fax Settings
Item Description
Interval Timer Specifies the interval time between resend attempts.
Number of Redial Specifies the number of redial attempts.
Int. of Redial Specifies the time between redial attempts.
Ans Select: Specifies the receiving mode:
• TEL Mode
Automatic fax reception is turned off. You can receive a
fax by picking up the handset of the external phone, and
then pressing the remote receive code, or by setting
OnHook to On (you can hear voice or fax tones from the
remote machine), and then pressing Start.
• FAX Mode
A fax is automatically received.
• TEL/FAX Mode
When the printer receive an incoming fax, the external
telephone rings for the time specified by Auto Ans.
TEL/FAX, and then the printer automatically receive the
fax. If incoming data is not a fax, the printer beeps the
internal speaker.
• Ans/FAX Mode
The printer can share one telephone line with an
answering machine. In this mode, the printer will monitor
the fax signal and pick up the line if there are fax tones. If
the phone communication in your country is serial, this
mode is not available.
• DRPD Mode
Before using the Distinctive Ring Pattern Detection
(DRPD) option, distinctive ring service must be installed
on your telephone line by the telephone company. After
the telephone company has provided a separate number
for faxing with a distinctive ring pattern, configure the fax
setup to monitor for that specific ring pattern.
Auto Answer Fax When FAX Mode is enabled, specifies how long the printer
waits before answering an incoming call. Values range from 0
to 255 seconds.
Auto Ans. TEL/FAX When TEL/FAX Mode is enabled, specifies how long the
printer waits before answering an incoming call. Values range
from 0 to 255 seconds.
Auto Ans. Ans/FAX When ANS/FAX Mode is enabled, specifies how long the
printer waits before answering an incoming call. Values range
from 0 to 255 seconds.
Line Monitor Specifies the volume of the external phone (line monitor).
Ring Tone Volume Specifies the volume for the incoming faxes.
Line Type Specifies the default line type.
Dialing Type Specifies the dialing type.