Filter
Top Products
Loading Paper
Phaser® 6128MFP Multifunction Printer
48
Loading Paper
This section includes:
• Loading Paper in the Paper Tray on page 48
• Loading Paper in the Manual Feed Slot on page 50
Loading Paper in the Paper Tray
Use the paper tray for a wide range of media including:
• Plain paper
•Card stock
•Labels
• Glossy paper
• Specialty media including business cards, postcards, trifold brochures, and
weatherproof paper
• Pre-printed paper (paper already printed on one side)
• Custom size paper
See also:
About Paper on page 45
In addition to plain paper, the paper tray can use various other sizes and types of print
media, such as envelopes.
Make sure of the following points when loading paper in the paper tray:
You can load up to 250 sheets or a stack of paper (65–220 g/m
2
, 17–40 lb. Bond, 40–80 lb.
cover) less than 15 mm high. Sizes can start from 3 x 5 in.
• Paper tray accepts print media within the following dimensions:
• Width: 76.2–216.0 mm (3–8.5 in.)
• Length: 127.0–355.6 mm (5–14 in.)
Make sure of the following points to avoid any troubles during printing:
• Do not load different types of paper at the same time.
• Use high quality paper for laser printers to print at high quality. See About Paper on
page 45.
• Do not remove or add paper to the tray when printing, or if there is any paper still in
the tray. Doing so may cause a paper jam.
• Do not put any objects other than paper on the tray. Also, do not push or force down
the paper tray.
• Always load paper short-edge feed.