Filter
Top Products
Fax
WorkCentre 7755/7765/7775 Multifunction Printer
System Administrator Guide
121
• Send Only
• Receive Only
9. Touch Next.
10. Touch Save to exit.
Note: The printer restarts with the new settings.
Configuring Embedded Fax Settings
Note: If your printer is locked, you must log in as a system administrator. For details, see System
Administrator Access at the Control Panel on page 15.
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Service Settings > Embedded Fax Settings.
3. Touch Line 1 Setup or Line 2 Setup.
4. Touch Fax Number then type the fax number using the touchscreen keypad.
Note: Customers in the Czech Republic are advised to contact their Xerox Service Representative
to perform this function.
5. Type a Line Name for the printer using the touchscreen keyboard, then touch Save. You can type a
maximum of 30 characters.
6. Touch Next.
7. Select fax send and receive Options:
• Send and Receive
• Send Only
• Receive Only
8. If allowed, under Dial Type, select your dialing method. If you have a tone line, select Tone. If you
have a 10-pulse-per-second line, select Pulse. If in doubt, touch Tone.
Notes:
• Most countries use Tone dialing.
• The Pulse/Tone feature is not available in some countries.
9. Touch Save.
Setting Fax Defaults
Setting Incoming Fax Defaults
To define defaults for incoming faxes for all users:
1. At the printer control panel, press the Machine Status button.
2. Touch the Tools tab, touch Service Settings, then touch Embedded Fax Settings.
3. Touch Incoming Fax Defaults to open the Incoming Fax Defaults window.
Enabling Auto Answer Delay
1. On the Incoming Fax Defaults window, touch Auto Answer Delay.