Filter
Top Products
Network Configuration
WorkCentre 7755/7765/7775 Multifunction Printer
System Administrator Guide
47
AppleTalk
AppleTalk is a proprietary suite of protocols developed for networking computers by Apple, Inc.
Notes:
• AppleTalk has been deprecated by Apple, Inc., in favor of TCP/IP networking.
• If your printer is locked, you must log in as a system administrator. For details, see
Accessing CentreWare IS on page 17.
Before you begin, ensure the following items are available:
1. An existing operational AppleTalk network.
2. The AppleTalk Name you wish to assign to your printer.
3. The AppleTalk Zone, if used, to assign to your printer.
Enabling AppleTalk on the printer
1. In CentreWare IS, click Properties > Connectivity > Protocols > AppleTalk.
2. Select Enabled to enable the protocol.
3. Type a name for the printer in Printer Name or use the default name XRX_MAC address.
4. Type the AppleTalk zone name in the Zone Name field.
Note: The default star (*) symbol for zone allows the closest router to assign the printer to a zone.
Only change the Zone Name if you have defined zones on your network.
5. Click Apply, then click OK.