Filter
Top Products
Network Configuration
WorkCentre 7755/7765/7775 Multifunction Printer
System Administrator Guide
41
The Test Results column displays the users name if the user is a member of the LDAP group or No
Access if they are not a member.
5. Click Apply.
Service Access Setup
Note: Service Access setup requires that Authentication is enabled and Tools and Feature Access
are configured to require users to log in before they can access services. For detail on these topics,
see Setting up Access Rights on page 54 and Controlling Access to Tools and Features on page 61.
You can specify access to the services of the printer under Service Access. Type the names of the LDAP
groups for any of the services listed.
1. On the Authorization Access page, click the Service Access tab.
2. Under Access Group, type the names of the LDAP groups allowed to access each of the individual
printer services.
3. To verify a users access to either role, type the user’s name in thanker User Name field, then click
Test.
The Test Results column displays the users name if the user is a member of the LDAP group or No
Access if they are not a member.
4. Click Apply.
Feature Access Setup
Note: Feature Access setup requires that Authentication is enabled and Tools and Feature Access
are configured to require users to log in before they can access features. For detail on these topics,
see Setting up Access Rights on page 54 and Controlling Access to Tools and Features on page 61.
You can set specific access to the color copying feature of the printer listed on the Feature Access page.
1. On the Authorization Access page, click the Feature Access tab.
2. Under Access Group, type the names of the LDAP groups allowed to access each individual
feature.
3. To verify a users access to either role, type the user’s name in thanker User Name field, then click
Test.
The Test Results column displays the users name if the user is a member of the LDAP group or No
Access if they are not a member
4. Click Apply.
Configuring Filters for LDAP
Note: If your printer is locked, you must log in as a system administrator. For details, see Accessing
CentreWare IS on page 17.
1. In CentreWare IS, click Properties > Connectivity > Protocols > LDAP.
2. Click Custom Filters at the top of the page.