Filter
Top Products
Using CentreWare Internet Services to Configure Settings on the Machine
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 System Administration Guide 107
• Get WINS Server Address
• Primary WINS Server Address
• Secondary WINS Server Address
• IP Filter
5. Select [Apply New Settings] to reflect the new setting.
6. Enter the user ID and password then select [OK].
NOTE: The default user ID is "11111" and the default password is "x-admin".
7. When the reboot message appears, select [Reboot].
NOTE: For more information about the contents of items, refer to the CentreWare
Internet Services chapter of the User Guide.
LPD and Port9100
This page allows you to configure the LPD and Port9100 settings for the following
options.
NOTE: Some settings on this page will only be available after you restart CentreWare
Internet Services, or after the machine is switched off and on.
1. At the CentreWare Internet Services home page for the machine, select the
[Properties] tab.
2. In the [Properties] frame, select the plus symbol [+] to the left of the [Protocol
Settings] folder.
3. Select [LPD] or [Port9100].
4. Set up the following options to be displayed in the frame.
• Port Number
• TBCP Filter (Only available when the optional PostScript Kit is installed.)
• Connection Time-Out
5. Select [Apply New Settings] to reflect the new setting.
6. Enter the user ID and password then select [OK].
NOTE: The default user ID is "11111" and the default password is "x-admin".
7. When the reboot message appears, select [Reboot].
NOTE: For more information about the contents of items, refer to the CentreWare
Internet Services chapter of the User Guide.
SNMP
This page allows you to configure the SNMP settings for the following options.
NOTE: Some settings on this page will only be available after you restart CentreWare
Internet Services, or after the machine is switched off and on.