Filter
Top Products
Problems using a NetWare Environment
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 System Administration Guide 147
The user name or group
name of the job is not defined
in the print server.
Use NWADMIN or
PCONSOLE to check
whether the user name or
group name of the job is
registered in the target print
server.*
<Action -1>
Re-send the print job to a
print queue in which the user
name or group name has
been registered correctly.*
<Action -2>
Use NWADMIN or
PCONSOLE to register the
user name or group name of
the job in the print server.*
The print job is in a print
queue that is not assigned to
the machine.
Use NWADMIN or
PCONSOLE to check
whether the machine is
assigned to the print queue.
<Action -1>
Re-send the print job to the
print queue assigned to the
machine.*
<Action -2>
Use NWADMIN or
PCONSOLE to assign the
target queue to the machine.*
The number of print queues
assigned exceeds the
maximum number that the
machine can support.
Use NWADMIN or
PCONSOLE to check
whether the required print
queue is assigned to the
machine.*
Re-send the print job to the
print queue assigned to the
machine.*
No slave file server is
specified (bindery mode).
Use PCONSOLE to check
whether a slave file server is
registered.*
Use PCONSOLE to register a
slave file server.*
Incorrect printer type. Use PCONSOLE to check
the printer type.*
Use PCONSOLE to specify
[Remote Parallel, LPT1].
Then reboot the machine.*
The setting for the slave file
server is incorrect (bindery
mode).
Use PCONSOLE to check
the setting.*
Use PCONSOLE to specify
the correct setting.*
The actual number of the
page of the print job is
different from the page
number set in the machine.
Use NWADMIN or
PCONSOLE to check
whether the starting paper
number is the same as that of
the print job.*
<Action -1>
Use NWADMIN or
PCONSOLE to match the
[Starting paper] number with
the paper number of the print
job.*
<Action -2>
Use PCONSOLE to stop the
print job. When the paper
number is invalid, change the
number, then re-send the
print job to the print queue.
Cause Confirmation Method Action