Filter
Top Products
110 Chapter 7– Color Workflow
3. In the Tray list, select the desired tray. The default is Tray 1. You can
print the calibration chart on any paper size that is equal to or larger
than A4 or Letter.
4. In the Screening Method list, select the screening method.
5. In the Media Type list, select the media type that you are using for the
print job. The default setting is
Use Printer Settings. When this option
is selected, your job is printed on the media type that is defined on the
Xerox DocuColor 240/250 printer-copier.
6. In the Image Quality list, select the image quality type.
7. Select the Gloss Mode check box if you want to calibrate for glossy
printing.
8. In the Number of copies box, enter the number of copies you want to
print.
9. Click Print.
The calibration chart prints.
10. Click Next.
Tip: It is recommended that you print at least 10 copies of the calibration
chart, and then use one of the last copies printed.