Filter
Top Products
28 Chapter 3– Getting Started
Turning On the Spire CX250 Color Server (Control
Station and Pro Configurations)
If you have the Control Station or Pro configurations, perform the
following procedure to turn on the Spire CX250 color server:
1. Turn on the monitor.
2. Do one of the following actions:
• Turn on the Xerox DocuColor 240/250 Printer-Copier.
The Spire CX250 color server turns on automatically when the
Xerox DocuColor 240/250 Printer-Copier is turned on.
• Press the green On/Off button on the front of the Spire CX250
color server.
The power indicator on the front panel lights up. The Windows
operating system starts, and the Spire CX250 color server splash screen
appears.
If you have the basic configuration, follow the procedure for turning on the
Spire CX250 color server on page 12.
Note: The Spire CX250 color server can be turned on when the Xerox
DocuColor 240/250 Printer-Copier is turned off. In this state, the server
runs until turned off manually by the user. If the server is running and
the printer is then turned on, the server continues running and is not
affected by this action.
Notes:
• If the Spire CX250 color server is already turned on, open the workspace
from the Start menu.
• By default, the Auto Log On check box is selected in the Settings
window. This option enables you to open the workspace without having
to go through the logon process each time. If you want to designate
different access levels for each user, you need to set security settings in
the Settings window. For more information about designating access
levels, see Security
on page 149.