Filter
Top Products
192 Appendix A– Setting Parameters
Step & Repeat: prints multiple copies of the same image on one
sheet so that the sheet is used to maximum capacity. This method is
used mainly for printing business cards.
If you select
Step & Repeat, the following option is available:
• Cut & Stack: enables Step & Repeat jobs to be printed, cut,
stacked, and bound in the most efficient manner while
preserving the original sorting. A job’s pages, booklets, or
books are sorted in a Z-shape. In other words, each stack of
pages is sorted in consecutive order. When stacks are piled one
on top of another, the entire job is already sorted up or down.
Saddle Stitch: prints pages ready for applying a book-finishing
technique in which the pages of a book are attached through
stitching or stapling in the spine fold—for example, brochures.
Perfect Bound: prints pages ready for applying a book-finishing
technique in which the pages of a book are attached by trimming
the spine fold, roughening the edges of the gathered pages, and
gluing them together—for example, hardcover books.
Sizes
1. In the Paper size list, select the desired paper stock size. If you select
Custom, type the height in the H box and width in the W box, and then
select
LEF or SEF.
2. In the Media type list, select the desired paper stock type. The default
setting is
Use Printer Settings. When this option is selected, your job
is printed on the media type that is defined on the Xerox DocuColor
240/250 printer-copier.
Notes:
• When you use the Step & Repeat template for VI jobs, the system
prints the job in Z-Sorting mode. This enables imposed VI jobs to be
sorted for cut-and-stack finishing.
• It is possible to use specific step-and-repeat templates to print several
different images on one sheet.
• This option is available only if you have the Pro configuration.
Note: If you select Cut & Stack, you cannot make changes or enter a
valid exception on the Exceptions tab.