Filter
Top Products
180 Appendix A– Setting Parameters
Tray
¾ In the Tray list, select the desired tray, and load the specific stock in this
tray. If you select
Auto, any tray with the specific paper stock is used.
Media Type
1. In the Media Type list, select the desired media.
2. In the Image Quality list, select the attributes of the media. The
options vary according to the media that you selected in the
Media
Type
list.
3. To create a glossy finish on the job pages, select Gloss Enhanced.
4. To print the second side of each page in a manual duplex workflow,
select
Side-2 printing.
Note: Make sure that the paper in the selected tray complies with all the other
paper stock parameters. If the paper in the tray does not match all the paper
stock parameters, the job is frozen.
Tip: If you selected Transparency, select the Add interleave check box to
insert a blank page between each transparency. To customize the interleave,
select a different paper size, media type, or tray from the appropriate lists.
Note: Side-2 printing is not supported for all media types.