Filter
Top Products
NOTE: Before you begin the media and ribbon calibration procedure, be sure
the Maximum Length is set to a value one step greater than the actual media. If
the Maximum Length is set to a lower value, the printer will assume that continu-
ous media is loaded.
NOTE: If the Maximum Label Length is changed to a value that is lower than
the length of the media being used, the printer will not calibrate.
MAXIMUM LENGTH
- 39.0IN 988MM +
Press the left oval key to decrease the value or press the right oval key to increase the value.
Default: 39.0 inches (988 mm)
Range: 2.0 inches (50 mm) to 39.0 inches (988 mm) in 1.0 inch (25.4 mm) increments.
Press the NEXT key to display LIST FONTS.
Configuration and Calibration
170PAX2-Series User’s Guide 15
LABEL
FEED
LABEL
LENGTH
LABEL
LENGTH
Figure 8. Maximum Label Length