Filter
Top Products
Press the right or left oval key to display other selections.
Default: Feed
Selections: Feed, Calibration, Length, No Motion
Press the NEXT key to display HEAD CLOSE.
Head Close
Determines the action of the media after the printhead has been opened and then closed.
“Calibration” recalibrates the media sensors, “Feed” feeds the label to the first web, “Length”
calculates the length of the label, and “No Motion” means the media does not move.
“Feed” is the recommended mode for an applicator.
HEAD CLOSE
¬FEED ®
Press the right or left oval key to display other selections.
Default: Feed
Selections: Feed, Calibration, Length, No Motion
Press the NEXT key to display BACKFEED.
Label Positioning Parameters
Backfeed Sequence
Determines when and how much label backfeed occurs in the Applicator mode. It has no effect in
Rewind or Tear-Off modes.
This parameter setting can be superseded by a ZPL/ZPL II instruction when received as part of a
label format. Refer to the “ZPL II Programming Guide.”
BACKFEED
¬DEFAULT ®
Press the right oval key for the next choice, or press the left oval key for the previous choice.
Default: 90% of the backfeed occurs after the label is dispensed; the remaining 10%
takes place before the next label is printed.
Selections: Default; After, Before, 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, or 90%
NOTE: The difference between the value entered and 100% establishes how
much backfeed occurs before the next label is printed. For example, a value of
40 means that 40% of the backfeed takes place after the label is dispensed. The
remaining 60% takes place before the next label prints. A value of “Before”
means that all backfeed will take place before the next label is printed.
Press the NEXT key to display LABEL TOP.
Configuration and Calibration
170PAX2-Series User’s Guide 25