Filter
Top Products
Care & Adjustments
Cleaning
CAUTION: Use only the cleaning agents indicated. Zebra Technologies
Corporation will not be responsible for damage caused by any other
cleaning materials used on the 170PAX2-Series print engine.
Table 1 provides a recommended cleaning schedule. Cleaning swabs saturated with 70% Isopropyl
Alcohol are available from your Zebra distributor as a Preventive Maintenance Kit (part # 01429).
Cleaning the Exterior
The exterior surfaces of the printer may be cleaned with a lint free cloth. Do not use harsh or
abrasive cleaning agents or solvents! If necessary, a mild detergent solution or desktop cleaner may be
used sparingly.
Cleaning the Interior
Remove any accumulated dirt and lint from the interior of the printer using a soft bristle brush and/or
vacuum cleaner. This area should be inspected after every roll of ribbon.
Cleaning the Sensors
To ensure proper operation of the printer, all sensors should be cleaned on a regular basis. To locate
the position of these sensors, refer to Figure 13.
170PAX2-Series User’s Guide
33
AREA METHOD INTERVAL
See Figures 13 and 14 for parts locations.
Printhead (1) Alcohol
After every roll of ribbon when printing in the
thermal transfer mode.
After every roll of media when printing in the
direct thermal mode.
Platen Roller (2) Alcohol
Media Path Alcohol
Transmissive Media
Sensor (3)
Air blow
Reflective Media
Sensor (4)
Air blow
Ribbon Sensor (5) Air blow
Door-Open Sensor (6) Air blow
Peel Bar (7) Alcohol After every roll of media or more often if
needed.
Table 1. Recommended Cleaning Schedule