Filter
Top Products
Setting the Left Position
The Left Position controls the initial print position from the left edge of a label (viewed as the label
exits the printer). The Default position is referenced to the left edge of the media. Refer to Figure 12.
Depending on the width of the media, the label format may begin printing on the backing material or
on the platen. To set the position where the format begins printing, change the Left Position value.
LEFT POSITION
® + 0000 +
Press the left oval key to move the cursor to the next digit, and press the right oval key to change the
+/- value and increase the value of the digit (“+” shifts to the left; “-” shifts to the right.) The
displayed value represents the number of dot positions the format will shift right or left.
Default: 0000
Range: -9999 to +9999 (If a negative value is required, enter the numeric value first, then
change the plus to a minus sign.)
Press the NEXT key to display HEAD TEST COUNT.
Configuration and Calibration
170PAX2-Series User’s Guide 27
LABEL
FEED
LABEL
LENGTH
LEFT
POSITION
LEFT
POSITION
-35 DOT ROWS
Figure 12. Left Position