Zebra Technologies 170PAX2TM Printer User Manual


 
Listing Printer Information
List Fonts
This selection is used to print a label that lists all of the fonts currently available in the printer. Fonts
may be stored in optional font EPROMs and as part of firmware EPROMs, on an optional PCMCIA
memory card, or downloaded and stored in formatting memory (RAM).
LIST FONTS
PRINT
Press the right oval key to print a label listing all of the fonts.
Press the NEXT key to display LIST BAR CODES.
List Bar Codes
This selection is used to print a label that lists all of the bar codes currently available in the printer.
LIST BAR CODES
PRINT
Press the right oval key to print a label listing all of the bar codes.
Press the NEXT key to display LIST IMAGES.
List Images
This selection is used to print a label that lists all of the graphic images currently stored in the
printer’s DRAM, optional EPROM, or on an optional memory card.
LIST IMAGES
PRINT
Press the right oval key to print a label listing all of the images.
Press the NEXT key to display LIST FORMATS.
List Formats
This selection is used to print a label that lists all of the formats currently stored in the printer’s
DRAM, optional EPROM, or on an optional memory card. Press the right oval key to print the label.
LIST FORMATS
PRINT
Press the right oval key to print a label listing all of the formats.
Press the NEXT key to display LIST SETUP.
List Setup
This selection is used to print a label that lists the current printer configuration information (same as
the CANCEL Key Self Test). Press the right oval key to print a label listing the current printer
configuration.
LIST SETUP
PRINT
Press the right oval key to print a label listing the current printer configuration.
Press the NEXT key to display INITIALIZE CARD.
16 170PAX2-Series User’s Guide
Configuration and Calibration