Filter
Top Products
LCD Adjust
Adjusts the brightness of the Liquid Crystal Display.
LCD ADJUST 00
- n +
Press the left oval key to decrease the brightness; the right oval key to increase the brightness.
Default: 00
Range: 00 to 19
Press the NEXT key to display LANGUAGE
Printer Language
Selecting the Liquid Crystal Display (LCD) Language.
Allows you to specify the language for the LCD prompts and error messages language. The selected
language will also be print on the following labels: setup/configuration, and the font, bar code,
graphic, and format listings.
LANGUAGE
¬ ENGLISH ®
NOTE: At the beginning of the programming process on page 12, it is recom-
mended that the user press the PREVIOUS key to display this parameter and
allow for international language selection. If you want the prompts displayed in a
language other than English, select the Printer Language, exit the Program Mode,
Save Permanent, then re-enter the Program Mode. The Front Panel Display will
now use the language selected. This allows the user to read the programming
prompts in the desired language.
Press the right oval key to select a language.
Default: English
Selections: English, Spanish, French, German, Italian, Norwegian, Portuguese, Swedish,
Spanish2, Dutch, Finnish, Custom
If this is the last configuration parameter, press the SETUP/EXIT key, select the desired Save Mode
(typically “Permanent”), then press the NEXT key to end the configuration process. Refer to
“Leaving the Program Mode” on page 11.
32 170PAX2-Series User’s Guide
Configuration and Calibration